 | PRODUCT DESCRIPTION
Spring Loaded Insert These inserts are designed to suit all sensor arrangements that utilise thermowells, with or without lagging extensions. Because they are of DIN mounting size they can be used as direct replacements for the inserts of other manufacturers as well as those of Thermal Detection Ltd. S P E C I F I C A T I O N Sheath
Material : |
316 stainless steel.
| Sheath :
| 3.0mm, 4.5mm, 6.0mm, 8.0mm or 9.5mm
OD. | Connection block :
| DIN standard ceramic base (33mm
mounting centres) with stainless steel
mounting plate and 2, 3, 4, or 6 nickel
plated brass poles.
|
Resistance Thermometer
Detector : |
single or duplex PT100 with 3 or 4 wire
connection, Class ‘B’ tolerance and to BS
EN 60751:1996.
| | Operating range : | -50 to +500°C (-58 to+932°F). | Thermocouple
Element : |
single, duplex or triplex elements (dependant
on sheath OD), types ‘T’ (Cu/Con), ‘E’ (NiCr/
Con), ‘J’ (Fe/Con) ‘K’ (NiCr/NiAl) or ’N’
(Nicrosil/Nisil) to BS EN 60584-1:1996. | | Operating range : | -50 to +850°C (-58 to +1562°F), depending
on thermocouple type. |
Temperature Transmitter
A temperature transmitter with a 4 to 20mA output can be supplied in place of the connection block for both hazardous and nonhazardous duties.
Other dimensions and tolerances outside the above specifications may also be available on application. |
|
|
|
|
<< Start < Prev 1 2 3 4 Next > End >>
|
|
Page 1 of 4 |
