 | PRODUCT DESCRIPTION
Light Duty
Industrial Temperature Sensor In areas of process plant where thermowells are not a necessity temperature sensors with a plain sheath and process connection are often adequate.
A similar connection head to that used on assemblies for heavier duties, enables them to be used in areas exposed to equally harsh environmental Conditions. S P E C I F I C A T I O N Sheath | 3.0mm, 4.5mm, 6.0mm, 8.0mm OD in 316
stainless steel.
| Process connection :
| optional ¼” to 1” BSPT or NPT (LDS), sliding
flange (LDF) or Tri-clover flange (LDF-T) . | Connection head :
| in die-cast aluminium with screw cap, retention
chain and M20 cable entry (as shown).
Cable entry screwed M20. Environmental
rating to IP67. For pharmaceutical applica
tions an FDA approved connection head in
GRP can be fitted or the same design cast
in stainless steel. |
Resistance Thermometer
Detector : |
single or duplex PT100 with 3 wire connection,
Class ‘B’ tolerance and to BS EN
60751:1996.
| | Operating range : | --50 to +380°C (-58 to+716°F). | Thermocouple
Element : |
single, duplex or triplex elements (dependant
on sheath OD), types ‘T’ (Cu/Con), ‘E’ (NiCr/
Con), ‘J’ (Fe/Con) ‘K’ (NiCr/NiAl) or
‘N’ (Nicrosil/Nisil) to BS EN 60584-1:1996. | | Operating range : | -50 to +850°C (-58 to +1562°F), depending on
thermocouple type. |
Temperature Transmitter
A temperature transmitter with a 4 to 20mA output can be supplied in place of the connection block for both hazardous and non-hazardous duties.
Other dimensions and tolerances outside the above specifications may also be available on application. |
|
