|
Heavy Duty Industrial Tempreture Sensors |
 |
 |
 |
 | PRODUCT DESCRIPTION Heavy Duty Industrial Temperature Sensor
with solid drilled, screwed thermowell Many areas of process plant demand temperature sensors with a rugged construction to meet both the demands of the process and the installation environment. A thermowell machined from solid bar stock offers a higher integrity for those more demanding process parameters. The choice of connection head type and extension also allows a specification to be drawn up that will satisfy most requirements. S P E C I F I C A T I O N Thermowell
Materials : |
304, 316 and 310 stainless steel, Hastelloy C, Mo-
nel, Nickel 200, Titanium.
| Process connection :
| ¼” to 1” BSPT or NPT. | Lagging extension :
|
½” NB pipe plain extension or ½” NB nipple / union/ nipple
in carbon steel, galvanised or 316 stainless steel.
| Connection head :
|
in die-cast aluminium with screw cap, retention chain and
M20 cable entry or ½” NPT conduit connection.
Environmental rating to IP67.
|
Spring loaded insert
Sheath : |
321, 316L or 310 stainless steel, 6mm OD (length to suit
thermowell) and fitted with a spring loaded ceramic terminal block .
| Resistance Thermometer
Detector : |
single or duplex PT100 with 3 wire connection, Class ‘B’
tolerance and to BS EN 60751:1996.
| Operating range :
| -50 to +380°C (-58 to+716°F). | Thermocouple
Detector : |
single, duplex or triplex elements, types ‘T’ (Cu/Con),
‘E’ (NiCr/Con), ‘J’ (Fe/Con) ‘K’ (NiCr/NiAl) or ‘N’ (Nicrosil/Nisil) to BS EN 60584-1:1996.
| Operating range :
| -50 to +850°C (-58 to +1562°F), depending on thermocouple type. |
A temperature transmitter with a 4 to 20mA output can be supplied in place of the connection block for both hazardous and non-hazardous duties. Other dimensions and tolerances outside the above specifications may also be available on application. |
|
|
|
|
<< Start < Prev 1 2 Next > End >>
|
|
Page 1 of 2 |
