|
Bearing Temperature Sensors |
 |
 |
 |
| - Available in both RTD’s
and thermocouples
- Copper tipped RTD’s for
fast time response and
greater tip sensitivity
- Spring loaded fittings with
50 PSI rated fluid seals
- Available sheath diameters:
0.188”, 0.215” & 0.250
- Cuttable design for field
sizing
- Electrically isolated tip
design available
- Wide temperature range
- Cast iron, aluminum and
stainless steel connection
heads available
- Custom OEM designs
- Use a Weed Instrument
Sensor-Mate® temperature
transmitter for 4-20mA
output
|
ORDERING INFORMATION
| Model | Description | | 101 | General purpose temperature sensor | | 102 | Copper tip temperature sensor | | 104 | Electrically isolated, copper | | 110 | Cuttable temperature sensor | | 112 | Copper tip, cuttable temperature | | 114 | Electrically isolated, copper tip, cuttable temperature sensor | | 120 | Patented Breakable R temperature sensor |
| Code | RTD / Thermocouple Type | | 01B | 100 ohm, Platinum, 0.00385 RTD | | 01A | 100 ohm, Platinum, 0.003902 RTD | | 09C | 10 ohm Copper RTD ±0.2% @ 25°C | | 12N | 120 ohm Nickel RTD ±0.5% @ 0°C | | JU | Type J Thermocouple, ungrounded | | KU | Type K Thermocouple, ungrounded | | TU | Type T Thermocouple, ungrounded | | EU | Type E Thermocouple, ungrounded |
| Code | Construction Temperature Limit | | A | 500 F Maximum | | C | 900 F Maximum |
| Code | Number of lead Wires | | 2 | 2-Wire RTD or 2-Wire Thermocouple | | 3 | 3-wire (Lead compensation) | | 4 | 4-wire or dual Thermocouple | | 6 | Dual 3-wire RTD | | 8 | Dual 4-wire |
| Code | Sheath Diameter | | B | 0.187" | | C | 0.250" | | D | 0.215" |
| Code | Sensor Length | | 24 | 24” cuttable (27” sheath) | | 48 | 48” cuttable (51” sheath) | | XXX.X | Specify length to nearest 0.1” |
| Code | Fluid Seal | | FS5 | Fluid Seal |
| Code | Leadwire Length in inches | | Zxxx | PTFE Insulated |
|
|
|
<< Start < Prev 1 2 3 Next > End >>
|
|
Page 3 of 3 |
